SOMFY TaHoma 5125850A Notice D'installation page 14

Easy installation with the adhesive tabs
• Clean the surface where you wish to affix the Movement
detector.
• Apply the adhesive strips to the back of the Indoor movement
detector.
• Affix the back of the Indoor movement detector in the chosen
location, ensuring the precautions for use are respected.
Installation with screws
• Place the back of the Indoor movement detector in the
selected location and mark the location of the 2 mounting
holes (6 holes for wall and ceiling mounting "A", and 2 holes for
mounting in a corner "B") with a pencil.
• Use suitable mounting screws and wall plugs to secure the
Indoor movement detector.
• Attach the Indoor movement detector securely.
A A B B
Resetting the Indoor movement detector
If you wish, you may delete the Indoor movement detector from
the TaHoma.
To delete the Indoor movement detector from the TaHoma,
unclip the unit's front panel and press the programming
button for 10 seconds; the light will come on then go off.
13
Copyright © 2015 Somfy SAS. All rights reserved.