Fit the battery in the correct direction
(+ pole on the + side and - pole on the - side).
Once the batteries are fitted, you can then add the Indoor
movement detector to the TaHoma.
Adding to the Tahoma
On the TaHoma interface, select the
- Click on the Configuration tab
- Click on the "IO" tab, then "Add".
- Follow the procedure shown on the screen.
- Once added, the light will go out.
Once added to the TaHoma, the Indoor movement detector is
operational.
Installation
If several detectors are to be used, the scope of the various
Indoor movement detectors must not overlap.
104°
Copyright © 2015 Somfy SAS. All rights reserved.
tab.
.
104°
11