Technical Description - Dometic TEC40D Notice D'utilisation

TEC40D
7

Technical description

The generator consists of the following main parts (fig. 1, page 3):
 Alternating current generator (1)
 Endothermic engine (2)
 Internal control panel (3)
 Inverter (4)
 Remote control (5)
The endothermic engine (2) drives the alternating current generator (1)
connected to it, which in turn generates AC voltage.
The integrated inverter (4) transforms this AC voltage into a stable voltage of
230 V and 50 Hz, which is available at the inverter terminal. The socket for
the connection cable to the control panel (5) is installed in the inverter.
The terminals and the main switch are installed in the internal control
panel (3) located behind the door.
The generator has an integrated battery charger for charging the connected
battery.
Control elements in the control panel
The control panel is located on the generator behind the cover.
No. in
fig. 2, Description
page 3
1 Main switch
2 Battery positive terminal
3 Main fuse
4 Battery charger fuse
EN
Technical description
Switches the generator to standby or no
function.
Connection to the positive battery termi-
nal.
Triggers if overvoltage occurs in the
inverter
Triggers if overvoltage occurs in the bat-
tery charger
13