Accessories; Intended Use; Technical Description - Dometic TEC Série Notice D'utilisation

TEC60, TEC60LPG
5

Accessories

Available as accessories (not included in the scope of delivery):
Part designation
PR 250116, external sealing kit
6

Intended use

The generator TEC60 (ref. no. 9102900229) and the generator TEC60LPG
(ref. no. 9102900230) are designed for use
cles for commercial use.
The generator is not suitable for installation in water vessels.
The generator produces a pure sine wave voltage of 230 V/50 Hz which can be
connected to the consumer with a total continuous load of
• TEC60: 6200 W
• TEC60LPG: 6000 W
The power quality is also suitable for sensitive consumers (such as PCs).
The generator can charge a 12 V battery.
7

Technical description

The generator consists of the following main parts (fig. 1, page 3):
• Power generator with permanent magnets (1)
• Combustion engine (2)
• Connection box (3)
• Inverter (4)
• Control panel (5)
The combustion engine (2) drives the power generator connected to it (1), which in
turn generates AC voltage.
The external inverter (4) transforms this AC voltage into a stable voltage of 230 V and
50 Hz, which is available at the inverter terminal. The socket for the connection cable
to the control panel is installed in the inverter.
The terminals and the main switch are installed in the connection box (3) located
behind the door.
EN
Reference no.
9102900244
motor homes, camper vans and vehi-
in
Accessories
13