Festool BP 18 Li I Notice D'utilisation page 31

► Activate the mobile dust extractor's
automatic mode (see the operating
manual for the mobile dust extrac­
tor).
► If you have used the cordless power
tool already, ensure that the battery
pack's capacity indicator has gone
out so that you can connect it (in cer­
tain cases, this can take a few sec­
onds).
► Press the connection button on the
mobile dust extractor or on the re­
mote control once.
The LED on the retrofit receiver
module slowly flashes blue and the
mobile dust extractor is ready for
connection for 60 seconds.
► Switch on the cordless power tool.
The mobile dust extractor starts up
and the battery pack is connected
until the mobile dust extractor is
manually switched off.
If a second battery pack is con­
nected to the mobile dust ex­
tractor, the connection to the
first battery pack is lost.
Switching the mobile dust extractor on
and off
Once you have connected the battery
pack with the mobile dust extractor, the
mobile dust extractor will start up auto­
matically when the cordless power tool
is in use.
English
31