Programmes; Options; Acoustic Signals - Atag VA61111KT Notice D'utilisation

16

PROGRAMMES

Programme Degree of soil
1) Type of load
Heavy soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and
cutlery
Fresh soil
2)
Crockery and
cutlery
Normal soil
3)
Crockery and
cutlery
All
4)
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

OPTIONS

Acoustic signals

The acoustic signals operate when the ap-
pliance has a malfunction and it is not pos-
sible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed. By
default, this acoustic signal is off, but it is
possible to activate it.
How to activate the acoustic signal for
the end of programme
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button
until the programme indicator
to flash and the programme indicator
comes on with fixed light.
Programme
phases
Prewash
Wash 70 °C
Rinses
Dry
Prewash
Wash 65 °C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
4. Press immediately the programme but-
ton.
• The programme indicator
• The programme indicator
5. Wait until the programme indicator
goes off. The programme indicator
continues to flash.
6. Press the programme button. The end
indicator comes on. The acoustic signal
for the end of programme is activated.
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to deactivate again the acoustic
starts
signal for the end of programme
1. Refer to "How to activate the acoustic
signal for the end of programme" and
Duration Energy
(min) (kWh)
130 - 150 1.3 - 1.4
100 - 110 1.2 - 1.6
30 0.8
195 1.02
14 0.1
on with fixed light.
flash.
Water
(l)
13 - 15
15 - 16
9
11
4
comes
starts to