Topcom BABYVIEWER 4400 Manuel De L'utilisateur page 6

®
30 The night light will be turned on for 30 minutes.
40 40 minutes.
60 60 minutes.
VOX The night light will go on automatically when the
voice of the baby is detected (VOX). When the
voice is no longer detected, the light will turn off.
On The light will burn continuously.
Off The light will be switched off.
– Press the OK button
17
– Press the + or - button
19
lower limit.
– Press the OK button
17
– Press the menu button
When the room temperature is exceeding the limits, a audio signal
is audible and the temperature flashes on the display.
11.7 Lullabies
There are totally 9 lullabies that can be
selected.
– Press the menu button. The
22
setting menu is displayed.
– Press the + button until the
19
melody symbol is highlighted.
– Press the OK button
17
– Press the + or - button
19
the lullaby or set the time of the
lullaby.
To select the lullaby
– Press the OK button
17
– Press the + or - button
19
(1-9). When 'ALL' is selected, all lullabies will be played in a
row. To de-activate the lullaby function, select
– Press the OK button
17
To select the time that lullaby needs to play.
– Press the OK button
17
– Press the + or - button
19
60 or 90 minutes). When 'ON' is selected, the lullaby will
play continuously.
– Press the OK button
17
– Press the menu button
To activate/deactivate the lullabies, press the
lullaby button
19
The volume of the lullabies can be changed by the
volume up of down button
10
11.8 Feeding/medicine alarm
2 event alarms can be set.
– Press the menu button. The
22
setting menu is displayed.
– Press the + button until the alarm
19
symbol is highlighted.
– Press the OK button
17
– Press the + or - button
19
select alarm 1 or 2.
– Press the OK button
17
The hour indication is red.
– Press the + or - button
19
change the hour.
– Press the OK button
17
is red.
– Press the + or - button
19
– Press the OK button
17
– Press the + or - button
19
– Press the OK button
17
– Press the menu button
6
.
to select the change the
21
to confirm.
2 times to leave the menu.
22
.
to set
21
when music note is blinking.
to select the desired melody
21
.
to confirm.
when music note is blinking.
to select the time (10/15/30/
21
to confirm.
2 times to leave the menu.
22
on the parent unit.
on the baby unit.
14
.
to
21
to confirm.
to
21
to confirm. The minutes indication
to change the minutes.
21
.
to select 'ON' or 'OFF'.
21
to confirm.
2 times to leave the menu.
22
Babytalker 3500 SEDS
When the timer alarm is audible, press a button on the parent unit
to switch off. If you don't change the status to off in the setting
menu, the alarm will sound daily.
11.9 Talking with your baby
You can use the parent unit to talk with your baby.
Allow your baby to get used to the talk function
before you use it in practice.
The volume can be changed by the volume up
of down button
– Press the Talk button
28
pressed.
– Hold the parent unit vertical with the microphone
approximately 10 cm from your mouth, and speak into the
microphone.
– Release button when you have finished talking.
28
11.10 Vibrator function
When an alarm is active, voice is detected in VOX mode or when
the temperature exceed the set levels, a vibration can be activated
together with the sound.
The vibration can be set by the switch
OFF).
11.11 Voice activated transmission (VOX)
During night and to save energy, the Babyviewer 4400 can be set
in VOX mode.
In VOX mode, the display will be activated as soon as the
microphone of the baby unit will capture sound.
The VOX can be set by the switch
OFF The speaker will be continously on. After 3
minutes of silence only the display will be off. Any
voice will trigger the dispay again.
L The baby unit will pick up louder sounds.
H The baby unit will pick up weaker sounds.
11.12 Night vision
The camera has 6 high-intensity infrared LED's
clear images in the dark. When the build in light sensor measures
the ambient light level as low, the LED's will automatically
activate.
The image changes automatically into black and
white mode under the night vision mode.
11.13 Problem causes and solutions
The following table is intended to help you localise and solve
minor problems.
Possible
Problem
The rechargeable Charging station
battery pack of the plug not connected
parent unit does
Dirty contacts
not charge
A rechargeable
battery is defective
Parent unit does The rechargeable
not switch on batteries are not
(display remains charged
black)
Equipment
defective
on the baby unit.
14
on the parent unit and hold it
on the parent unit (ON/
23
on the parent unit:
24
for picking up
2
Solution
cause
Connect plug
Clean the battery
terminals and
charging station
contacts with a soft
cloth
Replace the
batteries
Charge the
batteries
Contact customer
service
10