Charging A Standalone Battery; Estimated Charging Time; Battery; Charger - Motorola CLP Serie Guide D'utilisation

Charging a Standalone Battery

For your convenience the battery on the CLP radios
can be charged as a stand alone battery using either a
Single Unit Charger (SUC) or a Multi-Unit Charger
(MUC).
Note: When acquiring additional chargers or power
supplies, make sure you have similar drop-in tray
chargers and power supplies sets. For part number
details, refer to "Chargers" Section on page 44.
Micro-USB
Charging
Jack
To charge only the battery:
1. Insert the connector of the power supply into the
Micro USB port on the front of the drop-in
tray charger.
2. Connect the CLP power supply to a proper AC
outlet.
3. Insert the battery into the tray, with the inside
surface of the battery facing the front of the
charger, as shown.
4. Ensure the slots in the battery correctly engage
in the charger.

Estimated Charging Time

The following table provides the estimated charging
time of the battery.
Estimated Charging Time
Charging
Solution Standard Li- Ion

Battery

Single Unit
4 hours

Charger

Multi Unit
2.5 hours
Charger
5. For further details, see "Batteries" Section
on page 43.
Battery Type
High Capacity
Li-Ion Battery
5.5 hours
4 hours
15
English