Motorola CLP Serie Guide D'utilisation page 42

Symptom
Cannot activate VOX
Battery doesn't charge although it
has been placed in the drop-in
charger for a while
Unable to pair a Bluetooth
headset
Unable to connect to a Bluetooth
headset
Pairing with wrong Bluetooth
headset
Note: Whenever a feature in your radio seems to not correspond to the default or preprogrammed values,
check if your radio have been programmed using CPS with a customized profile.
32
English
VOX feature might be OFF.
Use the CPS to ensure that the VOX Sensitivity Level is not set
to "0".
Accessory not working or not compatible.
Check drop-in charger is connected and correspond to a
compatible power supply.
Refer to "Charging a Standalone Battery" Section on page 15.
Check the charger LEDs indicators to see if battery has a
problem. Refer to "Charger LED Indicator" Section on page 17.
Make sure the target Bluetooth headset is not connected to
another device.
Make sure the target Bluetooth headset is not connected to
another device.
Don't perform pairing procedures next to other Bluetooth
headset devices.
CLP Bluetooth uses proximity pairing. Make sure the headset is
placed next to the CLP radio.
Try this