Picture" Setting - Sony WEGA KV-DZ29 Mode D'emploi

x "Picture" setting
Press WEGA GATE and select "Settings".
Make sure the "Picture" icon (
selected, then press
"Scan Mode"
"Picture Mode"
"Intelligent Picture"
"Signal Level Indicator" Display the signal level when the "Intelligent Picture" is
"D-NR"
(Digital Noise
Reduction)
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Custom" mode is selected (see page 13).
• "Scan Mode" is not selectable when "Game Mode" is turned to "On". "Scan Mode"
is not available for HD (high-definition) and progressive input signals.
• "D-NR" is not available in HD and progressive input signals.
• "Signal Level Indicator" does not function in "HD/DVD 1" and "HD/DVD 2"
input modes.
12 GB
) is
.
Choose either "100Hz" (reduce flicker on the screen to provide a
stable picture) or "Progressive" (reduce jitter of any small areas
or scanning lines on the screen).
Choose either "Vivid" (bright, contrast and sharp), "Standard"
(normal) or "Custom"*.
Optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
functioning.
"Intelligent Picture Signal Level" indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red amber
(weak) (average)
Press V or v to select "On", then press
To cancel, select "Off", then press
functioning.
Reduce noise level automatically to get optimum picture.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
Scan Mode:
Picture Mode:
Picture Adjustment
Intelligent Picture:
Signal Level Indicator:
D-NR:
Select
.
.
green
(good)
.
. "Intelligent Picture" is still
.
.
100Hz
Vivid
On
On
On
Confirm End