Picture" Setting - Sony WEGA Trinitron KV-LS212 Mode D'emploi

x "Picture" setting
Press WEGA GATE and select "Settings".
Make sure the "Picture" icon (
then press
"Picture Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"Intelligent Picture"
"Signal Level Indicator"
* You can adjust the setting to your personal preference in the "Picture Adjustment",
"Color Temperature" and "VM" options only when the "Custom" mode is selected.
Adjusting the "Picture Adjustment" items under "Custom"
mode
1
Press V or v to select either "Picture" (contrast), "Brightness", "Color",
"Hue" (color tones) or "Sharpness", then press
Selecting "Reset" will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "Custom".
• "Hue" can be adjusted for the NTSC color system only.
• Reducing "Sharpness" can also reduce picture noise.
12 GB
.
Choose either "Vivid" (bright, contrast and sharp),
"Standard" (normal) or "Custom"*.
Adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
Sharpen the egdes of each object.
Choose either "High", "Low" or "Off".
Optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
Display the signal level when the "Intelligent Picture" is
functioning.
"Intelligent Picture Signal Level" indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red
(weak) (average)(fair ................. good)
Press V or v to select "On", then press
To cancel, select "Off", then press
still functioning.
) is selected,
amber green
Picture
Picture Mode:
Picture Adjustment
Color Temperature:
VM:
Intelligent Picture:
Signal Level Indicator:
Select Confirm
.
.
.
. "Intelligent Picture" is
.
Vivid
Cool
High
On
On
End
.