Getting Started - Sony WEGA KV-DZ29 Mode D'emploi

x Getting Started
Select Confirm
1
Step 1
Insert the batteries (supplied) into the remote.
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
• You can also connect the TV to other optional
components (see page 7).
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
• The 1 (standby) indicator flashes green for a few
seconds when turning on the TV. This does not indicate
a malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see page 6).
End
5 GB