3M 800 Série Guide De L'utilisateur page 22

Basic Operations
Action Description
PIP (Picture in Allows the user to turn the PIP function On or Off.
Picture)
PIP Input Allows the user to select which Input is to be displayed on the main channel:
9) Component
10) DVI and VGA
11) Computer
PIP Mode Allows the user to choose which PIP mode to display:
1) PIP (Picture-In-Picture) 2) PAP (Picture-and-Picture) ) POP (Picture-On-Picture)
PIP Size Allows the user to choose the size of the PIP window:
1) Small
PIP Position Adjusts the vertical and horizontal position of the projected PIP image.
Only VGA, DVI-D and DVI-A is Active (Only active when input is DVI or VGA).
PIP Location Allows the user to choose the position of the PIP window:
1) Top left 2) Top right ) Bottom left, Bottom right
PIP Brightness Adjusts the brightness of PIP image. The higher the setting, the brighter the image. The
lower the setting, the darker the image.
PIP Contrast Adjusts the degree of difference between the dark and light in the PIP. The higher the value,
the greater the contrast.
PIP Hue Adjusts the balance of red-to-green necessary for realistic representation of video signals.
PIP Color Adjusts the intensity of the Color in the image.
PIP Position Adjusts the vertical and horizontal position of the projected image.
Reset Reset values in this sub-menu only.
22
PIP Display sub menu
12) S-Video
1) Composite
2) Medium ) Large
Table 4: PIP sub menu function description
M Digital Media System 800 Series
™
© M 2006. All Rights Reserved.