Closing The Door - AEG AGS1600 Notice D'utilisation

Problem
It is too cold inside
the freezer
The appliance does
not work at all. Nei-
ther cooling nor
lighting works
The appliance does
not cool at all
Green indicator
flashing

8.1 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer
to "Installation".
Possible cause
Products to be frozen are
placed too closely to
each other
Temperature regulator
may be set incorrectly
Plug is not connected to
the mains socket properly
Power does not reach the
appliance
The appliance is not
switched on
There is no voltage in the
mains socket (try to con-
nect another appliance
into it)
Plug is not connected to
the mains socket properly
There is no voltage in the
mains socket (try to con-
nect another appliance
into it)
The appliance is not
switched on
Temperature Regulator is
not on
Temperature sensor
problem
3.
Solution
Place the products in a way
so that cold air could circu-
late among them
Set a warmer temperature
Connect the mains plug
properly
Try connecting another
electrical device to the
power outlet
Switch on the appliance
Call an electrician
Connect the mains plug
properly
Call an electrician
Switch on the appliance
Check the Temperature
Regulator
Call the service personnel
If necessary, replace the defective
door gaskets. Contact the Service
Center.
ENGLISH
65