Using Sizzlits® Or Decoetch™ Dies; Using Embossing Folders, Embosslits™ Or - SIZZIX Big Shot PRO Livret D'instructions

Sliding Tray
Using Sizzix® Sizzlits® or DecoEtch™ Dies
1. Place a Sizzlits Die onto a Standard Cutting Pad with foam side up. Place
material over the die. Place another Standard Cutting Pad over the paper or
material to create a "sandwich. "
2. Place "sandwich" on Big Shot™ Pro Solo Platform and Solo Shim (sold separately)
and place on top of the Adapter Pad in the Sliding Tray (Figure E).
3. Follow Steps 3–5 in Operating Instructions, page 5.
Textured Impressions
Embossing Folder
Using Embossing Folders, Embosslits™ or DecoEmboss™ Dies
1. With Textured Impressions™ Embossing Folder or Embosslits or DecoEmboss
Die open, insert paper, foil or other embossable material, then close like a
book. Place Standard Cutting Pads above and below the closed Folder to
create a "sandwich. "
2. Place "sandwich" on Big Shot Pro Solo Platform and Solo Shim (sold separately)
(Figure F) and place on top of the Adapter Pad in the Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 5.
"Sandwich"
Figure E
Material
Figure F
7
Cutting Pad
Material
Die
Cutting Pad
Solo Shim
Solo Platform
Adapter Pad
Cutting Pad
Textured Impressions
Embossing Folder
Cutting Pad
Solo Shim
Solo Platform
Adapter Pad