ESAB Origo Mig C280 PRO Manuel D'instructions page 27

Mig C340 PRO
(W. F. Mechanism 0455 890 881)
Item Denomination
A Pressure roller
B Feed roller
C Inlet nozzle
D Insert tube
E Outlet nozzle
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires MUST be
used. It is recommended to use 3m long welding gun for aluminium wires, equipped with appropriate
wear parts.
bc23wb
Ordering no. Notes
0369 728 001
0466 262 001 Knurled
0369 557 001 Ø 0.6-0.8mm Fe, Ss, cored wire.
0369 557 002 Ø 0.8-1.0mm Fe, Ss, cored wire.
0369 557 003 Ø 1.0-1.2mm Fe, Ss, cored wire.
0369 557 004 Ø 1.0-1.2mm cored wire, knurled.
0369 557 006 Ø 1.0-1.2mm Al wire.
0466 074 001
0455 894 001 Plastic, must be used together with item 0455 885 001,
for welding with Al wire.
0455 889 001 Steel, must be used together with item 0455 886 001.
0455 885 001 Must be used together with item 0455 894 001,
for welding with Al wire.
0455 886 001 Must be used together with item 0455 889 001.
- 27 -
© ESAB AB 2011