What To Do If - IKEA HARMONISK Manuel D'utilisation

ENGLISH
What to do if ...
Problem
The appliance does not work
The hood's suction level is not
enough
The light does not work
LED 1 blinks
LED 2 blinks
Possible cause
There is no mains
electrical power
The appliance is not
connected to the
electrical supply
The suction speed is too
low
The metal filters are
dirty
The air vents are
obstructed
The light bulb is broken
Grease filters are dirty.
Carbon filter is dirty.
Solution
Check for the presence of
mains electrical power.
Turn off the appliance and
restart it to see if the faults
persists.
Check if the appliance is
connected to the electrical
supply.
Turn off the appliance and
restart it to see if the faults
persists.
Check the suction speed and
adjust as necessary.
Check that the filters are clean
If not, clean the filters in the
dishwasher.
Check the air vents for any
obstructions and remove as
necessary.
For replacement, contact the
technical service.
Perform maintenance of grese
filter as described in the
relevant paragraph.
Perform maintenance of
carbon filter as described in
the relevant paragraph.
10