EUFAB 16475 Mode D'emploi page 4

Magnetic mobile phone holder
CONTENTS
1. PROPER USE OF THE PRODUCT ________________________ 4
2. SCOPE OF DELIVERY ______________________________ 4
3. SPECIFICATIONS _________________________________ 4
4. SAFETY PRECAUTIONS _____________________________ 4
5. OPERATING INSTRUCTIONS __________________________ 4
5.1 USING THE ROUND COUNTER PLATE _____________________ 4
5.2 USING THE SQUARE COUNTER PLATE ____________________ 4
5.3 MOUNTING THE MAGNETIC HOLDER _____________________ 5
WARNING!
Please read the operating instructions carefully prior to use and observe all safety instructions!
Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please
include these operating instructions as well.
Please check the contents of package for integrity and completeness prior to use!
1. PROPER USE OF THE PRODUCT
The magnetic mobile phone holder is used to secure mobile phones, smartphones
and navigation devices to the windshield or interior of a vehicle.
This device is not designed to be used by children or persons with limited mental
abilities or without experience and/or lack of required specialist knowledge. Keep
children away from the device.
Utilisation according to the intended purpose also includes the observance of all
information in these operating instructions, particularly the observance of the
safety instructions. Any other utilisation is considered to be contrary to the intended
purpose and may lead to material damages or personal injuries. EAL GmbH assumes
no liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
1x Magnetic holder
1x Magnetic counter plate, round
1x Magnetic counter plate, square
1x Instructions
3. SPECIFICATIONS
Magnetic counter plate, round: Ø 42 mm
Magnetic counter plate, square: 65 x 45 [mm]
Diameter of suction cup: 62 mm
4. SAFETY PRECAUTIONS
• The warning triangle labels all instructions important to safety.
Always follow these otherwise you could injure yourself or damage the
device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children
without supervision.
• Do not treat packaging material carelessly. This may become a
dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and spare parts that
are stated in these instructions or that are recommended by the
manufacturer!
• The magnetic mobile phone holder may not restrict the vision of the
vehicle's driver.
• The magnetic mobile phone holder may not hinder the vehicle's driver.
• The magnetic mobile phone holder may not be mounted in the
air-bag region. For more information, read the manual of your vehicle
or ask your specialist workshop.
4
5.4 SECURING THE MOBILE DEVICE TO THE MAGNETIC HOLDER _______ 5
5.5 SETTING THE VIEWING ANGLE ________________________ 5
5.6 UNFASTENING THE MAGNETIC HOLDER ___________________ 5
6. MAINTENANCE AND CARE ___________________________ 5
6.1 MAINTENANCE__________________________________ 5
6.2 CARE ________________________________________ 5
7. NOTES REGARDING ENVIRONMENTAL PROTECTION ___________ 5
8. CONTACT INFORMATION ____________________________ 5
5. OPERATING INSTRUCTIONS
5.1 USING THE ROUND COUNTER PLATE
The round counter plate is adhered to the rear of the mobile device. Before mounting,
clean the rear of your mobile device to ensure it is free from dirt, dust and grease.
Remove the protective film from the adhesive surface of the magnetic plate. Place
the magnetic plate centrally on the rear of your mobile device and push down firmly.
Figure 1: Utilising the round counter plate
The counter plate can be removed from your mobile device by carefully lifting the
counter plate from the rear of the mobile device using the blade of a knife.
Do not use aggressive cleaners or solvents to remove adhesive residue.
For more information, read the care notes for your mobile device.
The adhesive may cause permanent discolouration of the device surface
at the point at which the adhesive was applied.
5.2 USING THE SQUARE COUNTER PLATE
The square magnetic plate is used between the mobile device and the protective
cover. Remove the protective cover from your device. Remove dust and dirt from
the rear of your mobile device and the inside of the protective cover. Position the
square magnetic plate with the padded side against the mobile device and replace
the protective cover.
Figure 2: Utilising the square counter plate
After a longer period of use, dirt and dust will collect between the
mobile device and the protective cover. This may result in abrasions and
scratches on the device. For this reason, regularly clean the rear of the
device and the inside of the protective cover.