Use; First Use - Pelgrim MAC514RVS Mode D'emploi

USE

First use

Multi-function
selector
Start / stop key
Mode selector
Temperature /
power key
Setting the current time of day
When the appliance is first plugged in, the 'display' lights up. After
three seconds, the Clock symbol and "12:00" blink on the display.
1. Turn the 'Multi-function selector' to set the time of day.
2. Confirm the settings by pressing 'start / stop'.
If nothing is pressed, the settings are stored automatically after
three seconds.
You can always set the current time by pressing the "timer
button" twice. Then turn the 'Multi-function selector' to set the
current time. Confirm the settings by pressing "start/stop".
Using the oven
The oven has 10 oven functions and 1 cleaning function. Consult the
table to select the right oven function to prepare a dish.
1. Place the dish in the oven.
For most dishes the oven has to be preheated first.
2. Turn the 'Mode selector' to the desired oven setting.
The selected pictogram will appear on the display.
3. Touch the 'Temperature / power key'.
4. Set the oven to the desired temperature using the 'Multi-function
selector' (between 50-250
5. Select, if required, a cooking time by pressing the 'timer key'
6. Press the 'Start / stop' key.
The oven will start the oven function set and heat the oven to the
selected temperature. The temperature symbol in the display will
flash. When the oven has reached the selected temperature, the
temperature symbol in the display will remain illuminated.
Remarks
• The temperature can be adjusted during preparation.
• Cooking times are rough estimates and may vary subject to some
conditions.
• Some recipes should be preheated using the selected oven mode.
• If you are using parchment paper, make sure it is highly temperature
resistant.
.
°C)
EN 7