Display Details; Safety Instructions - VOLTCRAFT CT-3 Notice D'emploi

Display details

AC Alternating magnitude for voltage and current
DC Direct magnitude for voltage and current
V Volt (unit of electric potential)
mV Millivolt (exp.-3)
Ω
Ohm (unit of electric resistance)
kΩ Kiloohm (exp.3)
MΩ Megaohm (exp.6)
HOLD Measuring value is maintained
AUTO Auto range = automatic measuring range
MAX Displays maximum value
Change battery

SAFETY INSTRUCTIONS

Please read through the operating instructions completely before
using the product for the first time; they include important infor-
mation necessary for correct operation.
The guarantee will be rendered null and void if damage is caused
as a result of failure to observe the operating instructions. We will
not assume any responsibility for consequential damage.
We will also not assume any responsibility for damage to assets
or for personal injury caused by improper handling or failure to
observe the safety instructions. The warranty will be rendered
null and void in such cases.
This device left the factory in perfect condition in terms of safety engineering.
To maintain this condition and ensure safe operation, you, as the user, must comply
with the safety instructions and warnings contained in these instructions.
The following symbols must be observed:
31