Getting-In - AMF-BRUNS Linearlift Manuel D'utilisation

23 BedIenunGsAnLeITunG / oPeRATInG InsTRuCTIon / MAnuAL
17

Getting-in

1. Lower the platform by push on the pushbutton „down", till the platform will be lying on the
ground and the automatic barrier will be folded-down.
Caution!
Take care, that there is no person in the swivel-out area of the lift. Don´t get with the feet
into the lowering area of the platform or reach with parts of your body into the clearance between
the brackets!
Remark!
2. Wheelchair occupant move on the platform. We commend to move the platform backward.#
Caution!
Driving on the platform by electrical wheelchair is only admissible when its motor has been
turned off! The transport of companions on the platform is not allowed!
Drive in the center of the platform and never block the barrier with the wheels of the wheelchair!
3. Raising the platform by pushing on the pushbutton „up" until it will be reached at the upper edge of
the vehicle floor.
Caution! Don´t reach with partsof your body into
the clearance between the brackets!
Take care, that there is no person in the swivel area
of the lift!
4. By pushing on the pushbutton „up" once again the lift will be swivelling into the vehicle.
Caution! Make sure, that there is nobody in range of the lift! To prevent damage of the hydraulic,
release the pushbutton „up" if the lifte reached the stow position!
AMF-Bruns GmbH & Co. KG I Hauptstraße 101 I 26689 Apen
Telefon +49 (0) 44 89 / 72 72 -22 I Fax +49 (0) 44 89 / 62 45
UP
DOWN
Quick
Pushbutton „Down"
right
hubmatik@amf-bruns.de
www.amf-bruns.de
UP
DOWN
Quick
Pushbutton „Up"
false