When The Machine Is Turned On For The First Time - Canon imageRUNNER 1750i Guide De L'utilisateur

3
2
NOTE
• If the machine is managed with department IDs or user IDs, the log-in screen appears.
In this case, enter your department ID or user ID (and password). (See Chapter 2,
"Basic Operations," in the Reference Guide.)
• You can select the top screen of the desired function that appears when the machine
is turned ON. (See Chapter 3, "Configuring the Machine's Basic Settings," in the
Reference Guide.)

When the Machine Is Turned ON for the First Time

When the machine is turned ON for the first time, the initial setup screens (Setup
Guide) appear on the touch panel display, navigating you to perform the following
basic setup items:
• Language and country/region
• Mixing the toner
• Date & Time Settings
• Fax settings (unit telephone number, unit name, and telephone line type)
• IP address settings
Follow the procedure below to quickly set the machine configuration and use its
basic functions immediately.
2-14
Turning ON/OFF the Machine
Wait until the machine is ready to
scan.
The screen on the left is displayed until the
machine is ready to scan.
The screen on the left is displayed when the
machine is ready to scan.
IMPORTANT
If the machine is turned ON for the first
time, the display language selection
screen appears. In this case, proceed
to perform the initial setup. (See
"When the Machine Is Turned ON for
the First Time," on p. 2-14.)