Canon imageRUNNER 1750i Guide De L'utilisateur page 48

CAUTION
When connecting the interface cable or network cable, be sure to observe the
following precautions in order to avoid electrical shock:
- Turn OFF the main power switch before disconnecting the power cord from the
power outlet. (See "Turning OFF the Main Power," on p. 2-22.)
- Turn OFF the computer and disconnect the power cord from the power outlet.
Computer with
a 100BASE-TX
Port
Hub
The LAN port (RJ-45) is located
on the left side of the machine.
IMPORTANT
You cannot use the machine as a repeater, bridge, or gateway.
NOTE
• The machine can automatically detect the Ethernet speed (10BASE-T or
100BASE-TX).
• In a mixed 10BASE-T/100BASE-TX environment, devices on the network (hubs,
routers, etc.) must support the mixed environment. For more information, contact your
local authorized Canon dealer.
Computer with
a 10BASE-T
Port
LAN Cable
2-11
Cable Connection
2