Pioneer X-SMC02 Mode D'emploi page 4

01 Before you start
2 Insert the wall hanging screws into the lock
holes.
3 Slide to the left to secure in place. (Slide
distance is around 10 mm)
Note
• When attaching the unit to the wall, there is the
possibility of it falling depending on how it is attached.
Take due care to avoid any accidents.
• Select a location for the placement/installation of unit
that is sufficiently strong enough to hold the weight of
the unit. If you do not know the strength etc. of the wall,
then consult with a professional.
• The company bears no responsibility for accidents or
damages caused by inadequate installation/
attachment, incorrect use, modifications, natural
disasters etc.
• Place all cables along the wall to prevent anyone from
tripping over them.
WARNING
Wall mounting
• A mounting screw's ability to support a unit depends on
the material and the position of studs of the wall (We
recommend that you consult a home installation
professional).
4
En