Tool Identification; Main Components; Technical Data - FAR RAC 210 Traduction Des Instructions Originales

RAC 210

TOOL IDENTIFICATION

The riveting tool RAC 210 is identified from a marking that
shows company name and address of manufacturer, designation
of the tool, CE. Always refer to the information on the riveting
tool when requesting technical service.
Company name
and address
Serial number

MAIN COMPONENTS

A) ................................................................................. Nozzle
B) ............................................................Balancer connection
C) .................................................................... Nails container
D) .......................................................Suction opening button
E) ....................................................... Tensile strenght button
F) ........................................................................Oil tank plug
G) ................................................ Compressed air connection
H) .............................................................Head carring nozzle
I) ................................................................ Protection bottom
Revisione - 11
Designation of the tool
RAC 210
Date 01-2016
GB
46
Ø20
A
H
278
E
D
G

TECHNICAL DATA

• Working preessure .....................................................6 BAR
• Min. int. diam. of the compressed air
feeding hose ........................................ min. diam = 8 mm
• Air consumption per cycle ..........................................3,4 Nl
• Maximum force..............................................6 BAR-6639 N
• Weight ................................................................... 1,700 Kg
• TWorking temperature ..........................................-5°/+50°C
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. ......................... < 2,5 m/s
• A-weighted emission sound pressure level ............ 70 dBA
• Peak C-weighted instantaneous sound pressure <130 dBC
• A-weighted sound power ......................................... 87 dBA
AIR FEED
The air feed must be free from foreign bodies and humidity
in order to protect the tool from premature wear and tear of
the components in movement, therefore we suggest to use a
lubrificator group for compressed air.
270
B
F
C
I
Ø109
Ø53
2
13