NOTE:
AT FIRST USE, THE APPLIANCE MAY HAVE A SLIGHT ODOUR.
AT EACH RE-STARTING, THE APPLIANCE MAY HAVE WATER CON-
DENSATE ON THE GRID.
Disconnect the appliance from the power supply.
1.
2. Check that the fan is switched off.
3. Remove the screws with a cross head screwdriver (not supplied).
Disassemble the air filter, clean it with detergent (not petrol, alcohol, gas oil
or similar products) and dry it.
4. Remove the water cloth, clean it with
detergent (not petrol, alcohol, gas oil
or similar products) and dry it.
5. Drain the water contained in the tank
and clean it with a wet cloth or brush.
6. Clean the body of the unit with a dry cloth.
Do not use a wet cloth or any water jet because it could affect the safety
of the appliance and its appropriate working.
Reinstall water cloth.
7.
8. Reinstall the air filter with the related screws.
4- DAILY MAINTENANCE
EN - 9
PELER 4E