Basic Settings - UNITEC Climate WT3081 Manuel De L'utilisateur

BASIC SETTINGS

TIME, CONTRAST, TIME ZONE, TIME FORMAT
1. Press the „MENU" button 1 until the time field
flashes.
2. Use „" 3 and „" 4 to set the LCD contrast
from 0 to 8.
3. Press the „ENTER" button 2.
4. Use „" 3 and „" 4 to set the time zone
(Switzerland +1).
5. Press the „ENTER" button 2 again.
6. Use „" 3 and „" 4 to set the time display
format (12/24h).
7. Press the „ENTER" button (2) again.
8. Use „" 3 and „" 4 to manually set the time
to summer / winter time (not possible with DCF
because the setting is made automatically)
9. Press the „ENTER" button 2 again.
DATUM, DATUMSFORMAT, KALENDER, WECKZEIT
1. Press the „MENU" button 1 twice until the date
field flashes.
2. Use „" 3 and „" 4 to set the date format
with or without day of the week.
3. Press the „ENTER" button 2.
4. Use „" 3 and „" 4 to set the date format
5. Press the „ENTER" button 2 again.
6. Use „" 3 and „" 4 (4) to set the calendar
year.
7. Press the „ENTER" button 2 again.
8. Use „" 3 and „" 4 to set the month.
9. Press the „ENTER" button 2 again.
10. Use „" 3 and „" 4 to set the day.
11. Press the „ENTER" button 2 again.
12. Use „" 3 and „" 4 to set the hour for the
alarm.
13. Press the „ENTER" button 2 again
14. Use „" 3 and „" 4 to set the minute for the
alarm.
15. Activate the alarm by pressing the „  ON/OFF"
button 5.
16. Press the „ENTER" button 2 to complete the
programming procedure.
PRESSURE
English
313531__Funk-Wetterstation_Manual_180223.indd 18
1. Press the „MENU" button 1 three times until the
pressure trend field flashes.
2. Use „" 3 and „" 4 to set the period of the
trend indicator (12 – 24 hrs).
3. Press the „ENTER" button 2 to complete the
programming procedure.
1. Press the „MENU" button 1 four times until the
current pressure field flashes.
2. Use „" 3 and „" 4 to choose whether you want
to display relative pressure or absolute pressure.
3. Press the „ENTER" button 2.
4. Use „" 3 and „" 4 to set the unit of measu-
rement to be displayed (hPa, mmHg, inHg).
5. Press the „ENTER" button 2.
6. Use „" 3 and „" 4 to set the upper pressure
alarm.
7. Activate the HI pressure alarm by pressing the
„  ON/OFF" button 5.
8. Press the „ENTER" button 2.
9. Use „" 3 and „" 4 to set the lower pressure
alarm.
10. Activate the LO pressure alarm by pressing the
„  ON/OFF" button 5.
11. Press the „ENTER" button 2; the maximum
value and „max mem" begin to flash.
12. Press the „ENTER" button 2 for 3 seconds to
delete the maximum value.
13. Press the „ENTER" button 2; the minimum value
and „min mem" begin to flash.
14. Press the „ENTER" button 2 for 3 seconds to
delete the minimum value.
15. Press the „ENTER" button 2 to complete the
programming procedure.
WEATHER TREND, FORECAST
Sunny
Partially cloudy
Cloudy
Rainy
Snowfall
Storm
Snowstorm
Clear night sky
Overcast night sky
1. Press the „MENU" button 1 five times until the
forecast field flashes.
2. Use „" 3 and „" 4 to select the icon indicating
the current weather situation.
3. Press the „ENTER" button 2 and the trend arrows
will flash.
18
26.02.18 09:14