LaserLiner MultiClamp-Meter Pro Mode D'emploi page 13

• If the device comes into contact with moisture or other con-
ductive residue, work must not be carried out under voltage.
At and above voltages of 25 V AC/60 V DC, the presence of
moisture creates the risk of life-threatening electric shocks.
Clean and dry the device before use. When using the device
outdoors, make sure that the weather conditions are appropri-
ate and/or that suitable protection measures are taken.
• If you are taking measurements in the hazardous vicinity of
electrical installations, do not work alone and seek guidance
from an electrically skilled person before starting work.
• Isolate the device from all current sources before opening the
battery compartment cover.
• If possible, do not work alone.
Symbols
MultiClamp-Meter Pro
Hazardous electrical voltage warning:
Unprotected live components inside the device
housing may pose a risk of electric shock.
Danger area warning
Protection class II: The test device has
reinforced or double insulation.
Overvoltage category III: Equipment in xed
installations and for applications where speci c
requirements with regard to the reliability and
availability of equipment have to be met, e.g.
circuit-breakers in xed installations and devices
used in industrial applications which are perma-
nently connected to the xed installation.
13
GB