Proper Use; Technical Data; Maintenance And Cleaning; Ordering Replacement Parts - EINHELL Aschefilter 12L Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Ash filter
Original operating instructions

3. Proper use

The ash fi lter can be used together with a wet and
dry vacuum cleaner (not included), for vacuuming
cold ash or material from ovens, fi replaces or
barbecues.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Tank volume: ............................................ 12 liters
Weight: ........................................................1,9 kg
Anl_Aschefilter_12L_SPK9.indb 12
Anl_Aschefilter_12L_SPK9.indb 12
GB
5. Assembly and operation (Fig. 1-3)
Note the safety information and the operating
instructions issued for the wet and dry vacu-
um cleaner used (the vacuum cleaner is not
included in the delivery).
Plug the suction tube (5) onto the end of the
suction hose (4).
Plug the suction hose (4) into the connection
(6) and fasten it by turning.
For good cleaning of the exhaust air from your
wet and dry vacuum cleaner always use a dirt
bag and an additional pleated filter.
Plug the suction hose (8) of the wet and dry
vacuum cleaner into the connection (7).
Switch on the wet and dry vacuum cleaner (9)
and start with the vacuum cleaning.
Each time after use: Empty the ash filter,
check the wet and dry vacuum cleaner for
overheating (risk of fire) and replace the dust
bag.
6. Cleaning, maintance and ordering
replacements parts

6.1 Maintenance and cleaning

Completely empty the ash filter container
each time you have finished using it. If neces-
sary, clean with water and then dry.
Do not use cleaning agents or solvents; these
could attack the plastic parts of the equip-
ment. Also, never use combustible cleaning
agents.
Replace the dirt bag in accordance with the
operating instructions issued for the vacuum
cleaner.

6.2 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
- 12 -
13.11.2019 14:19:11
13.11.2019 14:19:11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23.516.06

Table des Matières