Krups i Prep & Cook XL Serie Mode D'emploi page 100

In the event of incorrect positioning of the bowl or incorrect locking of the lid (See Fig.
10.1 and 10.2), the logo
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds (Speed
1 & 2) and 10 continuous
progressive speeds (Speed 3
to 12)
Max intermittent speed (S13).
Selecting cooking speed.
From 30° to 150°C.
Heating indicator light: lights
up
and switches off when the
temperature inside the bowl
falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
1st connection pairing
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability. In the
event of instability, the motor rotation speed will be automatically reduced, if this instability
continues, the motor will be stopped and "STOP" will be displayed on the screen.
„ Check that the quantity of ingredients is not too large and that the speed used is the
correct one.
„ Check that you are using the recommended accessory.
„ Then restart your appliance normally.
93
starts to flash when a function is activated.
when cooking starts
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has 3 functions:
– 'Validation' of your
automatic program
selection or the settings
you have chosen in manual
mode (speed, cooking
temperature, time).
– 'Pause' when operating,
once the appliance has
been started.
– 'Reset' of the appliance
settings, selected by
pressing and holding for 2
seconds.
– 'Validation of step' in
step-by step recipes.