Patchwork - Janome DC4030 Manuel D'instructions

q w
q
q w
q
w
e r
w
e
e
w
Applique
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Presser foot pressure lever: 2 or 1
q Applique fabric
w Slit
e Edge
Applique, a technique for stitching fabric shapes onto
another fabric, opens limitless design possibilities.
Dimension and texture can be added by lightly stuffing
all or part of design. This machine has several different
patterns that can be used to enhance your applique.
In this type of applique, raw edges are folded under. First
cut the applique design out of cardboard. Next, place the
cardboard design on the fabric. Then cut the fabric
slightly larger than the cardboard. Fold the fabric raw
edge around the cardboard and press to form a perfectly
shaped design.
Remove the cardboard. Tape or pin the applique in place
and sew, using the slit on the satin stitch foot as a guide
next to the folded edge of the applique.

Patchwork

q Stitch pattern:
w Thread tension dial:
e Presser foot:
• To sew
q Wrong side of fabric
w Right side of fabric
Sew seam with straight stitch pattern 1 and press seam
allowance to open. Sew pattern stitch pattern 7 on right
side of garment centering over the seam line.
66
A
Satin stitch foot: F
A
Satin stitch foot: F