Table des Matières
Publicité
Lace Work
Machine setting
Pattern:
#10
Stitch length:
1–2
Stitch width:
3–6
Foot:
A: Zigzag foot
Thread tension:
3–5
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1.5 cm).
Place lace underneath and topstitch with blind hem
stitch. Trim excess fabric close to stitching.
Patchwork
Machine setting
Pattern:
#24 or #30
Stitch length:
S.S.
Stitch width:
4–6
Foot:
A: Zigzag foot
Thread tension:
3–5
Place two layers of the fabric with the right sides
together. Using a straight stitch, sew a seam.
Open seam flat.
Place the fabric under the foot so that the seam line
matches the center of the foot width.
Lower the foot and sew the pattern along the seam line.
Applique
Machine setting
Pattern:
#5 or #24
Stitch length:
0.8–2.0 or S.S.
Stitch width:
4–6
Foot:
F: Satin stitch foot
Thread tension:
3–5
Baste applique pieces on the fabric, or fuse the applique
pieces with an iron-on fabric joiner. Stitch around the
applique, making sure the needle falls along the raw
edge of the applique.
56
Publicité
Table des Matières
