Foster 7334/945 Manuel D'installation page 22

installation
3.
Place the cooktop centrally in the cut-
out and feed the mains connection cable
down through the cut-out. When doing
this, make sure that the seal under the
cooktop sits flush with the worktop on
all sides. This is important to ensure
an effective seal all round. Do not use
sealant (e.g. silicone). If the seal does
not meet the worktop correctly on the
corners the corner radius can be carefully
scribed to suit.
4.
Lock the cooktop into place with the 4 brackets provided, keeping in mind
the width of the surface.
B
A
5.
Make electrical connection following the specifications given in this manual
(see chapter ''Electrical connection")
6.
Connect the cooktop to the mains.
7.
Check that the cooktop works.
22
x4
4x
MAx20mm
A. bracket B. screw
30 mm | 1 ³⁄ "
2x
2x
3,5x9,5mm
2,9x9,5mm
40 mm | 1 ⁄ "
4x
3,5x9,5mm
2x
4,8x40mm