Deleting Transmitters - Becker Centronic VarioControl VC220 Notice De Montage Et D'utilisation

3) Deleting Transmitters

3a) Deleting transmitters individually
Note
The master transmitter programmed under 1) cannot be deleted. It is
only possible to overwrite the master transmitter (see point 4)
1. Press the programming button of the master transmitter for 3 seconds.
Confirmation occurs via optical feedback.
2. Now press the programming button of the transmitter which is to be deleted
for 3 seconds.
Confirmation occurs via optical feedback.
3. Subsequently press the programming button of the transmitter which is to be
deleted for 10 seconds.
Confirmation occurs via optical feedback.
The transmitter has been deleted from the VC220.
3b) Deleting all the transmitters (except the master transmitter)
1. Press the programming button of the master transmitter for 3 seconds.
Confirmation occurs via optical feedback.
2. Now once again press the programming button of the master transmitter for
3 seconds.
Confirmation occurs via optical feedback.
3. Subsequently press the programming button of the master transmitter for 10
seconds.
Confirmation occurs via optical feedback.
All the transmitters (except the master transmitter) have been deleted.
de
en
fr
nl
17