Deleting Transmitters - Becker Centronic VarioControl VC360-II Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Deleting individual transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten.
Press the programming button on the master transmitter for 3 seconds.
▻ The receiver confirms.
Now press the programming button of the transmitter to be deleted for 3
seconds.
▻ The receiver confirms.
Then re-press the programming button of the transmitter to be deleted for 10
seconds.
▻ The receiver confirms.
► The transmitter is now deleted from the radio receiver.
Deleting all transmitters (except the master
transmitter)
Press the programming button on the master transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master transmitter for 10 seconds.
▻ The receiver confirms.
► All transmitters (except the master transmitter) are now deleted from the
radio receiver.
32 - en

Deleting transmitters

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Centronic variocontrol vc360

Table des Matières