Pelgrim MWA300RVS Mode D'emploi page 41

INSTALLATION
Mounting
Suspended
• Remove the filters from the extractor hood.
A
A • Hold the hood against the wall.
• Working through the hood, draw the mounting holes (A).
• Drill the holes.
• Push the wall plugs supplied into the holes.
• Insert the screws into the 2 mounting holes (A).
NB: screw the screws in until 1 cm is left protruding from the wall.
• Hang the hood on the 2 mounting screws.
• Tighten the mounting screws.
• Connect the flue pipe to the flue ring.
Under a cabinet
A
A • Remove the filters from the extractor hood.
A
• Working through the hood, draw the mounting holes (A).
A
• Drill the holes.
• Insert the screws through the hood into the cabinet.
• Connect the flue pipe to the flue ring.
• Put the plug in the wall socket.
EN 11