Sony DSX-A415BT Mode D'emploi page 14

Selecting channels for SiriusXM
1
Press (browse).
2
Rotate the control dial to select
[CHANNEL], then press it.
3
Rotate the control dial to select the
desired channel, then press it.
To select channels with rapid browse mode
Press and hold  or  of remote commander more
than 2 seconds after [CHANNEL] selected, then
press ENTER.
To select channels from categories
1
Press (browse).
2
Rotate the control dial to select [CATEGORY], then
press it.
3
Rotate the control dial to select the desired
category, then press it.
The channel list appears.
4
Rotate the control dial to select the desired
channel, then press it.
To store channels
1
While receiving the channel that you want to store,
press and hold a number button (1 to 6) until [MEM]
appears.
To receive the stored channel, press MODE to select
the Band you want ([SX1], [SX2] or [SX3]), then press
a number button (1 to 6). (Each Band can store up to
6 channels.)
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [GENERAL]  [SXM PARENTAL]  [LOCK
SELECT]  [LOCK-ON].
3
Enter the passcode by rotating the control dial on
the unit or pressing / on the remote
commander.
14
GB
To move the entry position, press /
(SEEK –/+) on the unit or / on the remote
commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [LOCK-OFF].
To change the passcode
1
Press MENU and rotate the control dial.
2
Select [GENERAL]  [SXM PARENTAL]  [CODE EDIT].
3
Enter the current passcode on the current passcode
input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Number (Default)  Channel Name  Artist
Name  Song Title  Content Info  Category Name
 Clock  Battery Voltage