Toto Connelly TB221S Manuel D'installation Et D'utilisation page 5

INSTALLATION PROCEDURE - Handshower
1. Fasten the handshower mount to the
pre-installed rough collar.
Use hex key to fasten spout to valve
with provided set screw. Tighten as
needed.
2. Ensure gasket is in elbow nut and
faste to handshower until completely
seated. Attach elbow to handshower
hose. Attach handshower hose to
leader hose.
NOTE: Only one (1) gasket per
location shown, do not add if gasket
already present.
3. Retract handshower hose to seat
elbow in the handshower mount.
Elbow
Leader Hose
5
Gasket/Sieve
Handshower Hose