Mounting Of The Surface Housing - Eneo VKCD-1311FM/VF Mode D'emploi

4. Mounting of the Surface Housing

1 Stick the guide pattern on the wall
or ceiling
2 Drill four holes according to the
guide pattern then insert anchors
into the drilled holes
3 Draw out power / video wires to
the connecting places. If necessary,
seal the cable outlet at the housing
with silicone.
4 Fixed the camera to a celling using
four screws.
5 Adjust desired focus and scene
by turning and moving the 3-axis
camera bracket by hand.
6 Put the dome cover over the base.
7 Fix the dome cover on the base by
torx wrench key.
Ceiling
19
Sealing plate /
Drilling template
Dome base
Mounting screw
Dome cover
Torx wrench key