Safety Instructions - Eneo VKCD-1311FM/VF Mode D'emploi

1. Safety Instructions

• The following advice is for your safety and should be strictly followed.
• Read these safety instructions and the operation manual first before you install
and commission the camera.
• Keep the manual in a safe place for later reference.
• Never operate the camera outside of the specifications as this may prevent the
camera functioning.
• Do not install the camera in extreme temperature conditions.
Use the camera under conditions where temperatures are within -10°C to 50°C.
Be especially careful with ventilation under high temperatures.
• Never point the camera towards the sun with the aperture open.
This can destroy the sensor.
• Pay attention when laying the connection cable and observe that the cable is not
subject to heavy loads, kinks, or damage and no moisture can get in.
• The system may only be commissioned and maintained by personnel authorized
to do this and it must only be carried out in accordance with relevant standards
and guidelines.
• The fitter is responsible for the system of protection being followed in accordance
with the technical data, e.g. by sealing of the cable outlet at the housing with
silicone.
• Only use rust-free screws if the camera and its casing are fastened outdoors.
• Only use the manufacturer's original replacement parts for the dome camera
package.
NOTE: If the camera is exposed to spotlight or object reflecting the strong
light, smear or blooming may occur. Please check the power whether it
satisfies the normal specification before connecting the camera.
16