The Setup Menu - Honsel RivSmart eBZ ZERO S Manuel D'utilisation D'origine

THE SETUP MENU

The "Work Ready" screen is the working mask. In
addition to the function symbols, it also shows the
date and time as well as information on the select-
ed functions, such as counter, DMSD Lite or job.
From the "Work Ready" screen, you can switch at
any time to the setup menu by holding the "OK key"
(T) depressed (>2 s) and entering a password. You
can switch between the figures using the left and
right arrow keys (U). The values can then be set
by pressing the up and down arrow keys (U). Hold
the "OK key" (T) depressed again (>2 s) to quit the
setup menu at any time.
The standard administrator code is 1234. The
admin code can only be changed via the app.
After entering the admin code, press the "OK key"
(T) briefly to call up the setup menu.
SSID: WiFi name of this riveter
ROM: Firmware version of this riveter
S/N: Serial number of this riveter
This information is helpful if you have questions
about your riveter.
The complete setup menu is shown on the follow-
ing pages.
The various languages can be set in the "Lan-
guage" screen:
1. EN = English
2. DE = German
3. FR = French
4. ES = Spanish
5. IT = Italian
Confirm your selection with the "OK key" (T) or
quit the setup menu by holding the "OK key" (T)
depressed (>2 s).
English | 35