Adjusting The Seat Depth; Adjust The Brakes - Vermeiren V300 XL Mode D'emploi

3.4

Adjusting the seat depth

The Vermeiren V300 XL is adjustable in 2 seat depths by changing the back rest connection
c.
465 mm (Standard)
Position 1
3.5

Adjust the brakes

WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
   
dealer.
Adjust the brakes according following rules:
2
Seat depth
505 mm
Table 3: Seat depth
Position 2
Position 1
Position 2
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts d.
6. Check working of the brakes.
7. If necessary repeat the above steps until the
3
brakes are adjusted well.
ƒ‰‡
Back rest connection c c c c
Position 1
Position 2
The seat depth can be changed by the back
rest connection c according the following
steps:
1.
Remove the bolts.
2. Move the back rest connection c in the
desired position (see table 3).
3. Retighten the bolts.
4. Check the seat height and seat angle.
so the brake
d
V300 XL
2012-02
c
.
e
to
e