Transfer In And Out The Wheelchair; Correct Position In The Wheelchair; Riding The Wheelchair - Vermeiren V300 XL Mode D'emploi

3. To remove the arm rest, press button
tube hood f.
2.8

Transfer in and out the wheelchair

CAUTION:
In case you cannot perform the transfer in a safe manner, ask
   
someone to assist you.
CAUTION:
Risk of tipping over of the wheelchair – Do not stand on the foot
   
plates.
2.9

Correct position in the wheelchair

Some recommendations for a comfortable use of the wheelchair:
Position your backside as close as possible to the back rest.
•
Make sure your upper legs are horizontal – If needed adjust the length of the foot
•
rests. (see § 3.6)

2.10 Riding the wheelchair

WARNING:
    Risk of clamping – Prevent your fingers from being caught by the
wheels spokes.
WARNING:
Risk of clamping – Be careful passing through restricted passages
   
(e.g. doors).
WARNING:
Risk of burns – Be careful when driving in hot or cold environments
   
(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when
touching - Surfaces can assume the environment temperatures.
and pull the rear of the arm support from
e
1. Position the wheelchair as close as possible to
the chair, couch or bed to/from you wish to
transfer.
2. Check both brakes from the wheelchair are in
the on position.
3. Fold the foot plate upwards to prevent
standing on them.
4. If the transfer is on the side of the wheelchair,
fold the arm support on that side upwards.
(see § 2.7)
5. Transfer to/from the wheelchair.
ƒ‰‡
V300 XL
2012-02