Using Siri Eyes Free; Settings; Canceling The Demo Mode; Basic Setting Operation - Sony WX-900BT Mode D'emploi

E:\4575513111\4575513111WX900BTUC\01GB-WX900BTUC\030CD.fm
010COV.book Page 18 Friday, August 28, 2015 3:53 PM

Using Siri Eyes Free

Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the microphone.
This function requires you to connect an iPhone to
the unit via BLUETOOTH. Availability is limited
iPhone 4s or later. Make sure that your iPhone is
running the latest iOS version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with the
unit in advance. For details, see "Preparing a
BLUETOOTH Device" (page 7).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press and hold VOICE.
The voice command display appears.
3
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Press VOICE.
Notes
The iPhone may not recognize your voice depending
on usage conditions. (For example, if you are in a
moving car.)
Siri Eyes Free may not function properly, or the
response time may lag in locations where iPhone
signals are difficult to receive.
Depending on the iPhone's operating condition, Siri
Eyes Free may not function properly, or may quit.
If you play a track with an iPhone using the
BLUETOOTH audio connection, when the track starts
playback via BLUETOOTH, Siri Eyes Free automatically
quits and the unit switches to the BLUETOOTH audio
source.
When Siri Eyes Free is activated during audio
playback, the unit may switch to the BLUETOOTH
audio source even if you do not specify a track to play.
When connecting the iPhone to the USB port, Siri Eyes
Free may not function properly, or may quit.
When connecting the iPhone to the unit, do not
activate Siri with the iPhone. Siri Eyes Free may not
function properly, or may quit.
There is no audio sound while Siri Eyes Free is
activated.
18
GB

Settings

Canceling the DEMO Mode

You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1
Press MENU, rotate the control dial to
select [SET GENERAL], then press it.
2
Rotate the control dial to select [SET
DEMO], then press it.
3
Rotate the control dial to select [SET
DEMO-OFF], then press it.
The setting is complete.
4
Press (back) twice.
The display returns to normal reception/play
mode.

Basic Setting Operation

You can set items in the following setup categories:
General setup (GENERAL), Sound setup (SOUND),
Display setup (DISPLAY), BLUETOOTH setup (BT),
SongPal setup (SONGPAL)
(Not available when the BT phone is selected.)
1
Press MENU.
2
Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).

General Setup (GENERAL)

DEMO (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK-ADJ (clock adjust) (page 7)
BEEP
Activates the beep sound: [ON], [OFF].
masterpage: Left
WX-900BT
4-575-513-11(1)