EIBENSTOCK EOF 100.1 Mode D'emploi page 19

Instruction for Use
Switch the machine on and put it carefully on the surface you want to work
on. Hold the tool with both hands and work with circular or linear
movements.
For best working results: Don't put too much pressure on the surface you
want to work on.
Do not remove
Avoid multiple passes over the area, as otherwise too much material is
removed. With wood surfaces, the milling does not result in a surface
suitable for a new coating (paint...)
A finish grinding by hand or with a grinder (for example: orbital sander...) is
required.
Care and Maintenance
Before the beginning of the maintenance- or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel.
After every repair the machine has to be inspected by an electric specialist.
Due to its design, the power tool needs a minimum of care and
maintenance. The following works have to be carried out or rather the
component parts have to be inspected:
Always keep the power tool and the ventilation slots clean.

During work, please pay attention that no particles get inside the

machine.
In case of failure, a repair has to be carried out by an authorised

service workshop.
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
Environmental Protection
Raw Material Recycling Instead of Waste Disposal
To avoid damages on transportation, the power tool has to be delivered in
a sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool's plastic components are marked according to their material, which
makes it possible to remove environmental friendly and differentiated
because of available collection facilities.
more material
19
than absolutely required.