EIBENSTOCK EOF 100.1 Mode D'emploi page 14

Technical Data
Surface Milling Machine EOF 100.1
Rated voltage:
Rated current:
Power input:
Frequency:
Rated speed:
Max. disc diameter:
Spindle connection:
Weight:
Protection class:
Degree of protection:
Interference suppression:
Order no.:
Available special accessories:
Designation
PCD milling disk
HM milling disk
Industrial Vacuum Cleaner DSS 25 M
Industrial Vacuum Cleaner DSS 35 M iP
For further information about our products and our wide range of
accessories please see: www.eibenstock.com
Content of Delivery
Surface Milling Machine EOF 100.1 without milling disk with tool kit and
operating instructions in a case.
Intended Use
The surface milling machine EOF 100.1 is intended for professional use.
With a milling disk suitable for the respective substrate it is used for the
removal of paint, lacquer, coatings, carpet adhesive, contamination, etc.
Image Application
Mineral substrates
For example concrete
coatings, paint, carpet
adhesive, contamination,
graffiti
Wood substrates
For example paint, lacquer,
coatings,
not nail-proof
14
230 V ~
6,5 A
1400 W
50-60 Hz
10 000 rpm
100 mm
Ø 22,2 mm
3,40 kg
II
IP 20
EN 55014 and 61000
06535000
Order No.
37116000
37124000
09915000
09919000