Switch Off The Appliance; Cleaning And Maintenance; Cleaning The Induction Cooker - Brandt TI2FSOFT Manuel D'instruction

When time is over, digital screen will show "H" and you will hear a sight noise. System will
switch off automatically. To change time when using device, press timer button (3) then
+/- buttons. To cancel the timer function, press again on the timer button (3) during few
seconds. Timer light will switch off.
 Child lock mode
To lock the control pads during the cooking, press on Child lock button (10). The
indicator<<Lo>> will appear on the screen. In this case, only the On/Standby button (7)
can be used to switch off the appliance. If you press the On/Standby button while in child
lock mode, the screen will show 'H' or 'L', and the appliance is OFF. To unlock the control
panel, press On/Standby button again and then press again on "lock" button during 3
seconds.
d) Switch off the appliance
After use, the electric hob is hot, the buzzer rings and the indicator « H » flashes on the
screen. To switch off the appliance, press on the On/Standby button (7), then unplug the
socket.
Please, refer below table for wattage:
Level 1
Wattage(W) 120
Left Burner
Wattage(W) 120
Right
Burner

4)CLEANING AND MAINTENANCE

a) Cleaning the induction cooker
Switch off and unplug the appliance
Let it cool down before cleaning.
Regarding the glass-ceramic and the control panel :
Light dirt: clean with a soft wet cloth.

Oily dirt: clean with a soft wet cloth dipped with little toothpaste or neutral

detergent until the removal of residuals.
Do not use any flammable, acidic or alkaline materials or substances near the

induction cooker, as this may reduce the service life of the induction cooker and
pose a fire risk when the induction cooker is turned on.
Note: during the cleaning, never clean the surface of the induction cooker with a
rigid brush.
2 3 4
300 500 800
200 400 500
.
5 6 7
1000 1200 1400
700 900 1000
27
8 9 10
1600 1800 2000
1100 1300 1400