Table des Matières
Publicité
Hose
Hose Latch Tab
Languette de
blocage du tuyau
Pestaña de sujeción
de la manguera
Caddy
Slot
Fente
Ranura
Caddy
Porte-
accessorie
Bandeja
Attachments
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Notch
Fente
Ranura
Tab
Languette
Pestaña
Dusting Brush
Brosse à
épousseter
Cepillo para
sacudir
➢ Tilt the canister back.
➢ Align the hose latch tab and notch
in canister and insert hose into
canister until it snaps in place.
NOTE: The vacuum cleaner will not
start unless hose is fully inserted and
snapped in place.
To remove:
➢ Press hose latch tab inward and
pull out on hose.
➢ Align the tab on the wand with the
slot in the caddy.
➢ Press the caddy onto the wand and
snap the caddy into place
➢ Install the crevice tool and dusting
brush into the caddy as shown.
- 14 -
Publicité
Table des Matières
