Benelli IMPERIALE 400 Manuel Du Propriétaire page 124

Rear shock absorber
The bike is equipped with a rear shock ab-
sorber on each side.
Each shock absorber is equipped with a
spring preload adjustment ring, the rear
wheel spring can be adjusted according
to the driver's weight and load conditions,
driving style and road conditions.
Adjust when the vehicle is stable on the
main stand or on the side stand, turn the
preload ring to the required point.
STIFFER
SOFTER
ATTENZIONE
To avoid damaging the mechanism, do
not attempt to turn over the maximum
or minimum setting.
Always entrust the assistance of the
shock to a Benelli authorized dealer.
TORQUE VALUE
Upper xing bolt: 37-44N.m
Lower xing bolt: 22-29N.m
5 stages adjustable
3 - 15
Instrument and control functions
EN
3