Internal Display - Nikon MONARCH 7 i VR Manuel D'utilisation

En ￭ Internal display
Es
Fr
Pt
Laser irradiation mark
Horizontal distance mode
First Target Priority mode
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
: "Failure to measure" or "Unable to measure"
*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
10
VR (Vibration Reduction) function-employing
Distance
Do not look towards the objective lens side while this mark is shown.
model indication
Battery condition
Target mark
Unit of measure (m/yd.)
Distant Target Priority mode